Austin Community College - Start Here. Get There. Welcome to Austin Community College
Enlarge TextReduce TextPrinter Friendly
Course Schedule
ApplyScheduleRegister
Credit and Non-Credit
Schedule Notes | Registration Help | Academic Departments | Course Schedule Key | ACC Location Legend | College Calendar

Spring 2010 Course Schedule

Course Listings as of May 27, 2010 at 08:25am
This schedule is subject to change.

Architectural & Engineering Computer Aided Design


Bouvier, Shirley OH DFTG 2419 Intermediate Computer-Aided Drafting OH Bouvier, Shirley E
 2 R + [  8/ 10] 07962 Lec 008|      NRG  NRG3 3222  MW        9:00am-11:30am OH Bouvier, Shirley E

Carhart, Robert OH DFTG 1458 Electrical/Electronic Drafting
c  R + [ 11/ 10] 08228 Lec 002|      NRG  NRG3 3220  TTh       7:30pm-10:00pm OH Carhart, Robert A

Casnovsky, William OH DFTG 1495 Special Topics in Mechanical Drafting and Mechanical Drafting CAD/CADD
08234 - Special Topic: Solid Works
c  R + [ 13/ 13] 08234 Lec 001|      NRG  NRG3 3217  TTh       7:30pm-10:00pm OH Casnovsky, William M

Clark, Erlene OH DFTG 1491 Special Topics in Drafting and Design Technology/Technician, General
08370 - DRAFTING PORTFOLIO - Internet access required. Open to advanced students only. E. Clark, 223.4843, email: eclark2@austincc.edu - This Capstone course has 1 MANDATORY Onsite Orientation meeting & 2 MANDATORY Onsite meetings (call 223.4841 for info).
c  A + [ 17/ 17] 08370 OPC 001|      PCM  Addit'l Distance Learning info   OH Clark, Erlene M

Corral, Ada OH DFTG 1417 Architectural Drafting -- Residential
 1 R + [ 11/ 12] 08223 Lec 001|      NRG  NRG3 3220  MW        9:00am-11:30am OH Corral, Ada

Do, Cong OH DFTG 2471 Integrated Circuit Layout and Design II
x  R + [  0/ 10] 07971 Lec 003|      NRG  NRG3 3222  TTh       7:30pm-10:00pm OH Do, Cong
DFTG 1494 Special Topics in Electrical/Electronics Drafting and Electrical/Electronics CAD/CADD
Special Topics: Integrated Circuit Layout & Design III
 5 R + [  3/  8] 08233 Lec 001|      NRG  NRG3 3225  S         9:00am- 2:10pm OH Do, Cong

Dolese, Charles OH ARCE 1452 Structural Drafting
 1 R + [ 15/ 16] 03669 Lec 001|      NRG  NRG3 3218  MW        4:55pm- 7:25pm OH Dolese, Charles H
c  R + [  9/  8] 08374 Lec 002|      NRG  NRG3 3202  S         9:00am- 2:10pm OH Dolese, Charles H

Duren, Kimberly OH DFTG 1405 Technical Drafting
 3 R   [ 11/ 14] 08216 Lec 003|      NRG  NRG3 3217  MW       11:35am- 2:05pm OH Duren, Kimberly A
 2 R   [ 12/ 14] 08220 Lec 007|      NRG  NRG3 3217  TTh       2:15pm- 4:45pm OH Duren, Kimberly A
DFTG 1433 Mechanical Drafting
 2 R + [ 12/ 14] 08227 Lec 002|      NRG  NRG3 3231  MW        4:55pm- 7:25pm OH Duren, Kimberly A
DFTG 2402 Machine Drafting
c  R + [ 11/ 10] 08235 Lec 001|      NRG  NRG3 3220  TTh       4:55pm- 7:25pm OH Duren, Kimberly A

Fletcher, Donald OH DFTG 1405 Technical Drafting
 1 R   [ 13/ 14] 08221 Lec 008|      NRG  NRG3 3217  MW        4:55pm- 7:25pm OH Fletcher, Donald J
DFTG 2419 Intermediate Computer-Aided Drafting
c  R + [  8/  8] 07961 Lec 007|      NRG  NRG3 3222  S         9:00am- 2:10pm OH Fletcher, Donald J

Fuller, Ashleigh OH DFTG 2419 Intermediate Computer-Aided Drafting
 2 R + [  8/ 10] 07957 Lec 002|      NRG  NRG3 3220  MW       11:35am- 2:05pm OH Fuller, Ashleigh D
 2 R + [  8/ 10] 07960 Lec 005|      NRG  NRG3 3220  MW        2:15pm- 4:45pm OH Fuller, Ashleigh D

Gideon, Lee OH DFTG 2419 Intermediate Computer-Aided Drafting
 2 R + [  8/ 10] 08238 Lec 001|      NRG  NRG3 3222  MW        4:55pm- 7:25pm OH Gideon, Lee E
DFTG 2432 Advanced Computer-Aided Drafting
c  R + [ 10/ 10] 07967 Lec 001|      NRG  NRG3 3220  TTh       2:15pm- 4:45pm OH Gideon, Lee E
DFTG 2436 CAD Programming
07968 - This section of CAD Programming is a classroom hybrid course using both traditional and online learning. Students meet once a week on Monday for lecture with the instructor and complete outside class work online. Prerequisite: Advanced CAD (DFTG 2432), or instructor approval. For more information, please email Sam Gideon at sgideon@austincc.edu.
x  R + [  0/ 10] 07968 Lec 001|      NRG  NRG3 3231  MW        2:15pm- 4:45pm OH Gideon, Lee E

Glock, John OH DFTG 1405 Technical Drafting
 1 R   [ 13/ 14] 08215 Lec 002|      NRG  NRG3 3217  TTh       9:00am-11:30am OH Glock, John W

Grinkmeyer, Brett OH DFTG 2428 Architectural Drafting - Commercial
 1 R + [ 11/ 12] 07964 Lec 002|      NRG  NRG3 3231  MW        7:30pm-10:00pm OH Grinkmeyer, Brett A

Gruber, Daniel OH DFTG 1492 Special Topics in Architectural Drafting and Architectural CAD/CADD
Special Topic: Advanced Residential
c  R + [ 12/ 12] 08230 Lec 001|      NRG  NRG3 3231  MW        9:00am-11:30am OH Gruber, Daniel C
DFTG 1417 Architectural Drafting -- Residential
 4 R + [  4/  8] 08225 Lec 003|      NRG  NRG3 3220  S         9:00am- 2:10pm OH Gruber, Daniel C

Lafont, Clint OH DFTG 2473 Introduction to CAD/CAM
c  R + [ 12/ 10] 07972 Lec 001|      NRG  NRG3 3220  MW        4:55pm- 7:25pm OH Lafont, Clint L

Lineberger, Jennifer OH DFTG 2430 Civil Drafting
c  R + [ 13/ 12] 07966 Lec 002|      NRG  NRG3 3218  S         9:00am- 2:10pm OH Lineberger, Jennifer A
c  R + [ 13/ 12] 08373 Lec 003|      NRG  NRG3 3217  TTh       4:55pm- 7:25pm OH Lineberger, Jennifer A

Lym, Bryan OH DFTG 2474 Architectural Modeling
 4 R + [  8/ 12] 07973 Lec 001|      NRG  NRG3 3218  TTh       7:30pm-10:00pm OH Lym, Bryan L

Mireles, Brigido OH DFTG 1405 Technical Drafting
 3 R   [ 11/ 14] 08214 Lec 001|      NRG  NRG3 3217  MW        2:15pm- 4:45pm OH Mireles, Brigido H

Muhammad, Jeffrey OH DFTG 1493 Special Topics in Civil Drafting and Civil Engineering CAD/CADD
 2 R + [ 12/ 14] 08231 Lec 001|      NRG  NRG3 3218  TTh       4:55pm- 7:25pm OH Muhammad, Jeffrey
Special Topic: Advanced Civil
 1 R + [ 14/ 15] 08232 Lec 002|      NRG  NRG3 3218  MW        9:00am-11:30am OH Muhammad, Jeffrey
DFTG 2419 Intermediate Computer-Aided Drafting
 1 R + [  9/ 10] 07959 Lec 004|      NRG  NRG3 3220  TTh      11:35am- 2:05pm OH Muhammad, Jeffrey
DFTG 2430 Civil Drafting
c  R + [ 15/ 14] 07965 Lec 001|      NRG  NRG3 3218  MW        2:15pm- 4:45pm OH Muhammad, Jeffrey

Ramirez, Antonio OH DFTG 1405 Technical Drafting
 3 R   [ 11/ 14] 08219 Lec 006|      NRG  NRG3 3217  MW        9:00am-11:30am OH Ramirez, Antonio M
DFTG 2412 Technical Illustration and Presentation
c  R + [ 16/ 16] 08237 Lec 001|      NRG  NRG3 3218  TTh      11:35am- 2:05pm OH Ramirez, Antonio M

Roach, Mark OH DFTG 1417 Architectural Drafting -- Residential
c  R + [ 12/ 12] 08224 Lec 002|      NRG  NRG3 3218  MW        7:30pm-10:00pm OH Roach, Mark L
DFTG 2428 Architectural Drafting - Commercial
c  R + [ 14/ 14] 07963 Lec 001|      NRG  NRG3 3218  TTh       9:00am-11:30am OH Roach, Mark L

Robinson, Daryl OH DFTG 1405 Technical Drafting
 5 R   [  9/ 14] 08222 Lec 009|      NRG  NRG3 3217  S         9:00am- 2:10pm OH Robinson, Daryl T

Singletary, Brian OH DFTG 2405 Printed Circuit Board Design
 1 R + [  9/ 10] 08236 Lec 001|      NRG  NRG3 3222  MW        7:30pm-10:00pm OH Singletary, Brian L

Smith, Douglas OH DFTG 1405 Technical Drafting
c  R   [ 14/ 14] 08218 Lec 005|      NRG  NRG3 3217  TTh      11:35am- 2:05pm OH Smith, Douglas W
DFTG 1433 Mechanical Drafting
 1 R + [ 14/ 15] 08226 Lec 001|      NRG  NRG3 3218  MW       11:35am- 2:05pm OH Smith, Douglas W
DFTG 1491 Special Topics in Drafting and Design Technology/Technician, General
08229 - DRAFTING PORTFOLIO - Internet access required. Open to advanced students only. D. Smith, 223.4853, email: douglas@austincc.edu - This Capstone course has 1 MANDATORY Onsite Orientation meeting & 2 MANDATORY Onsite meetings (call 223.4841 for info).
c  A + [ 20/ 17] 08229 OPC 002|      PCM  Addit'l Distance Learning info   OH Smith, Douglas W

Summers, Mark OH DFTG 2440 Solid Modeling/Design
 2 R + [ 13/ 15] 07969 Lec 001|      NRG  NRG3 3218  TTh       2:15pm- 4:45pm OH Summers, Mark T

Taylor, Samuel OH DFTG 1405 Technical Drafting
 4 R   [ 10/ 14] 08217 Lec 004|      NRG  NRG3 3217  MW        7:30pm-10:00pm OH Taylor, Samuel E

Tiede, John OH DFTG 1495 Special Topics in Mechanical Drafting and Mechanical Drafting CAD/CADD
08252 - Special Topic: MEMS
 6 R + [  4/ 10] 08252 Lec 002|      NRG  NRG3 3222  F         9:00am- 2:10pm OH Tiede, John F

Triggs, Riley OH DFTG 2474 Architectural Modeling
c  R + [ 12/ 10] 08211 Lec 002|      NRG  NRG3 3231  MW       11:35am- 2:05pm OH Triggs, Riley G

Wassom, Jeffrey OH DFTG 2419 Intermediate Computer-Aided Drafting
 1 R + [  9/ 10] 07958 Lec 003|      NRG  NRG3 3220  MW        7:30pm-10:00pm OH Wassom, Jeffrey C

Wesolick, Casey OH DFTG 2470 Integrated Circuit Layout and Design I
 1 R + [  9/ 10] 07970 Lec 002|      NRG  NRG3 3222  TTh       4:55pm- 7:25pm OH Wesolick, Casey D

Last Updated: May 27, 2010 at 08:25am
Return to Course Index
Schedule Notes | Registration Help | Academic Departments | Course Schedule Key | ACC Location Legend | College Calendar

Registration Help Number: 223-INFO (223-4636)


Schedule Notes
The course number is linked to the ACC catalog description for that course. Please refer to the course description for information about the content of the course. If the instructor has a web page, it is linked to their name.

NOTE: The first column indicates the current status of the course. If the section is open, then the number indicates the remaining SEATS AVAILABLE. A small "c" in the first column indicates a CLOSED section which is currently filled and a small "x" indicates a CANCELLED class which is no longer offered. The number is brackets is the maximum capacity for that section.


Future StudentsCurrent StudentsFaculty and StaffCommunity and BusinessNewsroomA-Z Index