Fall 2009 Course Schedule

Course Listings as of November 22, 2009 at 8:00pm
This schedule is subject to change.

Architectural & Engineering Computer Aided Design

DISTANCE LEARNING

16 Week Session => August 24, 2009 THRU December 13, 2009

DFTG 1491 Special Topics in Drafting and Design Technology/Technician, General
40100 - DRAFTING PORTFOLIO - Internet access required. Open to advanced students only. D. Smith, 223.4853, email: douglas@austincc.edu This Capstone course has 1 MANDATORY Onsite Orientation meeting & 2 MANDATORY Onsite meetings (call 223.4841 for info).

  1 A + [ 15/ 16] 40100 OPC 001|      PCM  Addit'l Distance Learning info   OH Smith, Douglas W

39141 - DRAFTING PORTFOLIO - Internet access required. Open to advanced students only. E. Clark, 223.4843, email: eclark2@austincc.edu This Capstone course has 1 MANDATORY Onsite Orientation meeting & 2 MANDATORY Onsite meetings (call 223.4841 for info).

  1 A + [ 11/ 12] 39141 OPC 002|      PCM  Addit'l Distance Learning info   OH Clark, Erlene M
CLASSROOM COURSES

16 Week Session => August 24, 2009 THRU December 13, 2009

DFTG 1405 Technical Drafting

  c R   [ 14/ 14] 40092 Lec 008|      NRG  NRG3 3217  MW        9:00am-11:30am OH Ramirez, Antonio M
  1 R   [ 13/ 14] 40086 Lec 002|      NRG  NRG3 3217  MW        2:15pm- 4:45pm OH Duren, Kimberly A
  c R   [ 15/ 14] 40089 Lec 005|      NRG  NRG3 3217  MW        4:55pm- 7:25pm OH Fletcher, Donald J
  1 R   [ 13/ 14] 40088 Lec 004|      NRG  NRG3 3217  MW        7:30pm-10:00pm OH Taylor, Samuel E
  c R   [ 14/ 14] 40091 Lec 007|      NRG  NRG3 3217  S         9:00am- 2:10pm OH Robinson, Daryl T
  2 R   [ 12/ 14] 40093 Lec 009|      NRG  NRG3 3217  TTh       9:00am-11:30am OH Duren, Kimberly A
  1 R   [ 13/ 14] 40090 Lec 006|      NRG  NRG3 3217  TTh      11:35am- 2:05pm OH Smith, Douglas W
  c R   [ 14/ 14] 40085 Lec 001|      NRG  NRG3 3217  TTh       4:55pm- 7:25pm OH Mireles, Brigido H

DFTG 1417 Architectural Drafting -- Residential

  3 R + [ 11/ 14] 40095 Lec 002|      NRG  NRG3 3231  MW        9:00am-11:30am OH Corral, Ada
  3 R + [  5/  8] 40094 Lec 001|      NRG  NRG3 3220  S         9:00am- 2:10pm OH Gruber, Daniel C
  4 R + [ 12/ 16] 40096 Lec 003|      NRG  NRG3 3218  TTh       7:30pm-10:00pm OH Roach, Mark L

DFTG 1433 Mechanical Drafting

  c R + [ 14/ 14] 40098 Lec 003|      NRG  NRG3 3231  MW       11:35am- 2:05pm OH Smith, Douglas W
  1 R + [ 13/ 14] 40097 Lec 002|      NRG  NRG3 3231  MW        4:55pm- 7:25pm OH Duren, Kimberly A

ARCE 1452 Structural Drafting

  c R + [ 16/ 16] 39089 Lec 001|      NRG  NRG3 3218  MW        9:00am-11:30am OH Glock, John W
  2 R + [ 10/ 12] 44272 Lec 002|      NRG  NRG3 3202  S         9:00am- 2:10pm OH Dolese, Charles H

DFTG 1458 Electrical/Electronic Drafting

  4 R + [  9/ 13] 40099 Lec 001|      NRG  NRG3 3217  TTh       7:30pm-10:00pm OH Carhart, Robert A

DFTG 1492 Special Topics in Architectural Drafting and Architectural CAD/CADD
Special Topic: Advanced Residential

  1 R + [ 12/ 13] 40101 Lec 001|      NRG  NRG3 3217  MW       11:35am- 2:05pm OH Clark, Erlene M

DFTG 1493 Special Topics in Civil Drafting and Civil Engineering CAD/CADD
Special Topic: Advanced Civil

  c R + [ 15/ 14] 40103 Lec 002|      NRG  NRG3 3218  MW        4:55pm- 7:25pm OH Muhammad, Jeffrey
  c R + [ 11/ 11] 40102 Lec 001|      NRG  NRG3 3220  TTh       9:00am-11:30am OH Muhammad, Jeffrey

DFTG 1494 Special Topics in Electrical/Electronics Drafting and Electrical/Electronics CAD/CADD
Special Topics: Integrated Circuit Layout & Design III

  1 R + [  7/  8] 40104 Lec 001|      NRG  NRG3 3225  S         9:00am- 2:10pm OH Do, Cong

DFTG 1495 Special Topics in Mechanical Drafting and Mechanical Drafting CAD/CADD
Special Topic: Solid Works

  c R + [ 15/ 15] 40105 Lec 003|      NRG  NRG3 3218  MW        2:15pm- 4:45pm OH Casnovsky, William M

DFTG 2402 Machine Drafting

  5 R + [ 10/ 15] 40106 Lec 001|      NRG  NRG3 3218  TTh       2:15pm- 4:45pm OH Duren, Kimberly A

DFTG 2405 Printed Circuit Board Design

  6 R + [  4/ 10] 40107 Lec 001|      NRG  NRG3 3222  MW        7:30pm-10:00pm OH Singletary, Brian L

DFTG 2412 Technical Illustration and Presentation

  c R + [ 10/ 10] 44275 Lec 002|      NRG  NRG3 3222  MW        9:00am-11:30am OH Triggs, Riley G
  1 R + [ 14/ 15] 40108 Lec 001|      NRG  NRG3 3218  TTh      11:35am- 2:05pm OH Ramirez, Antonio M

DFTG 2419 Intermediate Computer-Aided Drafting

  2 R + [  8/ 10] 40111 Lec 003|      NRG  NRG3 3220  MW        9:00am-11:30am OH Fuller, Ashleigh D
  4 R + [  6/ 10] 40110 Lec 002|      NRG  NRG3 3220  MW       11:35am- 2:05pm OH Fuller, Ashleigh D
  2 R + [  8/ 10] 40112 Lec 004|      NRG  NRG3 3220  MW        2:15pm- 4:45pm OH Triggs, Riley G
  1 R + [  9/ 10] 40114 Lec 006|      NRG  NRG3 3222  MW        4:55pm- 7:25pm OH Gideon, Lee E
  1 R + [  9/ 10] 40115 Lec 008|      NRG  NRG3 3222  S         9:00am- 2:10pm OH Fletcher, Donald J
  2 R + [  8/ 10] 40109 Lec 001|      NRG  NRG3 3220  TTh      11:35am- 2:05pm OH Muhammad, Jeffrey
  c R + [ 10/ 10] 40113 Lec 005|      NRG  NRG3 3220  TTh       7:30pm-10:00pm OH Wassom, Jeffrey C

DFTG 2428 Architectural Drafting - Commercial

  1 R + [ 14/ 15] 40116 Lec 001|      NRG  NRG3 3218  TTh       9:00am-11:30am OH Clark, Erlene M
  1 R + [  9/ 10] 44274 Lec 002|      NRG  NRG3 3231  TTh       7:30pm-10:00pm OH Grinkmeyer, Brett A

DFTG 2430 Civil Drafting

  c R + [ 16/ 14] 40117 Lec 001|      NRG  NRG3 3218  MW       11:35am- 2:05pm OH Muhammad, Jeffrey
  c R + [ 16/ 15] 44273 Lec 002|      NRG  NRG3 3218  MW        7:30pm-10:00pm OH Lineberger, Jennifer A
  2 R + [ 12/ 14] 40118 Lec 003|      NRG  NRG3 3218  S         9:00am- 2:10pm OH Lineberger, Jennifer A

DFTG 2432 Advanced Computer-Aided Drafting

  c R + [ 10/ 10] 40119 Lec 001|      NRG  NRG3 3220  TTh       2:15pm- 4:45pm OH Bouvier, Shirley E

40120 - This section of Advanced Computer-Aided Drafting is a classroom hybrid course using both traditional and online learning. It will meet once a week on Tuesday for lecture with the instructor and outside class work will be completed online. If you need more information please email Sam Gideon at sgideon@austincc.edu.

  1 R + [  9/ 10] 40120 Lec 002|      NRG  NRG3 3220  TTh       4:55pm- 7:25pm OH Gideon, Lee E

DFTG 2440 Solid Modeling/Design

  1 R + [  9/ 10] 40121 Lec 002|      NRG  NRG3 3220  MW        7:30pm-10:00pm OH Summers, Mark T

DFTG 2470 Integrated Circuit Layout and Design I

  4 R + [  6/ 10] 40122 Lec 001|      NRG  NRG3 3222  TTh       7:30pm-10:00pm OH Do, Cong

DFTG 2471 Integrated Circuit Layout and Design II

  x R + [  0/ 10] 40123 Lec 001|      NRG  NRG3 3222  TTh       4:55pm- 7:25pm OH Wesolick, Casey D

DFTG 2473 Introduction to CAD/CAM

  c R + [ 10/ 10] 40124 Lec 001|      NRG  NRG3 3220  MW        4:55pm- 7:25pm OH Lafont, Clint L

DFTG 2474 Architectural Modeling

  1 R + [ 15/ 16] 40125 Lec 002|      NRG  NRG3 3218  TTh       4:55pm- 7:25pm OH Lym, Bryan L

Last Updated: November 22, 2009 at 8:00pm
Return to Course Index

Registration Help Number: 223-INFO (223-4636)

Schedule Notes
The course number is linked to the ACC catalog description for that course. Please refer to the course description for information about the content of the course. If the instructor has a web page, it is linked to their name.

NOTE: The first column indicates the current status of the course. If the section is open, then the number indicates the remaining SEATS AVAILABLE. A small "c" in the first column indicates a CLOSED section which is currently filled and a small "x" indicates a CANCELLED class which is no longer offered. The number is brackets is the maximum capacity for that section.


Directory	Educational Choices • Costs & Financial Aid • Student Support • Library • Locations • Get Answers
ACC Home » Austin Community College Course Schedule
Course Schedule	Apply • Schedule • Register
Credit and Non-Credit